Hire us for one stage or the whole wall. Every scope is written out line by line, so you know exactly what's included before work starts.
HangManufacturer spec + code
Drywall Installation
Field-measured, cut to the room as it stands, and hung tight.
We measure every wall and ceiling in the scope on site, then cut and fit each sheet around the windows, doors, outlets and penetrations that are actually there. Board is fastened to your existing framing at the manufacturer's spacing and to building code, leaving a flat, solid surface that's ready for finishing.
Included
- Material delivery to your site
- Field measurements of every designated section
- Cutting, fitting and fastening to existing framing
- Clean installation around openings and penetrations
Not included: joint taping, finishing, priming and painting. Add them separately, or choose the Hang & Finish package.
FinishGA-214 Level 4
Drywall Finishing, Level 4
Joints and fasteners that disappear under paint.
Level 4 is the Gypsum Association's standard for walls that will take flat or eggshell paint. We embed tape in every joint, build up the required coats of compound over joints, fasteners and corner accessories, then sand everything to one smooth, even plane. Your painter gets a surface that's ready for primer, with nothing to fix first.
Included
- Tape embedded in every joint
- Required compound coats on joints, fasteners and accessories
- Sanding and surface preparation for primer
- Finished to the GA-214 Level 4 standard
Not included: primer, painting and Level 5 skim coating.
Hang + FinishComplete package
Drywall Installation & Finishing, Level 4
One crew from bare framing to primer-ready walls.
Our complete drywall scope puts installation and Level 4 finishing under one contract. The same crew that measures and hangs your board tapes and finishes it, so there's no hand-off between trades, no second schedule to wait on, and one team accountable for how the walls turn out.
Included
- Everything in Drywall Installation
- Everything in Level 4 Finishing
- One crew and one schedule, start to finish
- Walls handed over sanded and ready for primer
Not included: primer, painting and Level 5 skim coating.
Paint2 finish coats
Interior Wall Painting, 2 Coats
Two full coats, crisp lines, and a room you can use the day we leave.
We protect the room before a can is opened: floors covered, trim and adjacent finishes masked. After basic surface prep, we apply two finishing coats of the color you approved, by roller, brush or spray, whichever lays down best on the surface. Cleanup is part of the job, not an afterthought.
Included
- Basic surface preparation
- Masking and protection of adjacent finishes
- Two coats of customer-approved interior wall paint
- Standard cleanup when the work is done
Not included: drywall repairs, extensive surface preparation and primer. We'll quote these separately when a wall needs them.
